| Easy |
- Unscrew the top of the air filter box where
the current air filter is (you will know if its the right 'box' or not
because there will be a corrugated tube going into it). The air
filter box is located directly above the battery on both the 2.2L and
2.4L models.
- Remove the old air filter.
Oil the new
filter with the K&N oil kit (sold separately for about $10) unless it is
pre-oiled (even if it is, its not a bad idea to oil it again, as the
filter may have been sitting for quite some time).
- If you have to oil your filter yourself,
simply spray the entire surface with the special oil, and let it dry about for
15 min. If you aren't sure if the filter is already oiled, you
can usually tell by the colour. If the filter is red, then it is
probably pre-oiled. If it's white, then it needs oil.
- After the filter has
dried for ~15 mins, put it
in and and screw the filter box shut. You're ready to go.
|