Lower Motor Mount Install

Skill Level Step-By-Step Instructions
  1. Jack up car, support on jack stands. Take the passenger side wheel off.
  2. Remove the passenger wheel well cover.
  3. The mount is held in place by (2) 15mm bolts.  Remove them, and remove stock mount.
  4. Insert your new RK Sport mount and line up one hole, insert bolt, tighten a bit.
  5. Now, take your sacrificial screwdriver and line up the second hole.  I put the bolt in once the one side was close, and then used a hammer to tap it through.  Then simply reinstall the nut, and you're done.
Tools Required
  • Unwanted Slot Screwdriver
  • 15mm Socket


  • Eric Spitznogle