| Easy |
-
Remove all clutter from console.
-
Look inside large cavity to the rear of the console. Remove the (2)
10mm bolts located in the bottom.
- Lift area around shifter. Simply pull up on the trim, it just
pops out with a bit of upward force (its held in with metal tabs, so try to avoid losing them!).
-
Beside shifter, remove 3rd 10mm bolt.
- In front cavity, there is a 4th bolt. This bolt is covered by a
small plate which pops out easily with a flat screwdriver.
- To completely remove the console, it is necessary to remove the
shift knob. Instructions will vary with shift knobs, but stock 5 speed
and automatic transmission knobs
have a "C" clip in front that is easily pried out with a flat screwdriver.
-
Console should lift off easily, with a little work to clear the
dash.
- Install in reverse order, being careful to fully tighten shift knob,
or replace clip in stock shift knob.
|